What's new in CAE ?

Rate this item
(10 votes)
11 December 2689 times

Computer Aided Engineering (CAE) is fast becoming an essential ingredient in any engineering design process. Be it product modeling, process analysis or virtual prototype, CAE technology in various form appears throughout engineering industry. Most of the current engineering products and services are first vitalized on computer. CAE field as a technology is evolving and its application horizons constantly expanding.

What's new in CAE ? - 4.1 out of 5 based on 10 votes

Electrostatic Precipitators (ESP) Analysis Using CFD

Rate this item
(11 votes)
26 November 14974 times

The particulate emissions from process industries has received great attention due to the upcoming strict environmental protection agency (EPA) regulations and conservation in recent years. The Electrostatic precipitators (ESP) since its development in 1907 by Frederick G. Cottrell (Professor of chemistry at the University of California, Berkeley) have been the most common, effective and reliable technologies for removal of hazardous emissions like flue gases, acid droplets and fine particles.

Electrostatic Precipitators (ESP) Analysis Using CFD - 4.6 out of 5 based on 11 votes

The Falling Droplet

Rate this item
(9 votes)
12 November 10026 times

We all have seen the rain drops falling on roof tops or road or car roofs, or water droplets falling from tap. When we usually see these phenomenons occur around us they happen within no time. We don’t even notice them. But if we look closely there are very complex physics involved in them. What if we could really slow down time and observe closely these phenomenon occurring? Like this video from Discovery Channel which shows a slow motion capture of a droplet falling into a liquid surface.

The Falling Droplet - 4.4 out of 5 based on 9 votes

FREE Webinar: CAD-Repair for CFD Simulation

Rate this item
(9 votes)
29 October 5664 times

Are you a CFD engineer? Have you ever faced trouble doing meshing because of CAD issues like complexity in CAD model and CAD data loss while importing CAD geometry in CFD tools? Do you want to know how to do CAD repair and how to get geometry ready for analysis? Its necessity, process and how to do CAD-Repair? Being a CFD analyst do you want to know how to extract CFD domain and how to simplify the task of creating good quality mesh that is required for CFD analysis?

FREE Webinar: CAD-Repair for CFD Simulation - 4.9 out of 5 based on 9 votes

Recent Trends in Modeling of Combustion

Rate this item
(6 votes)
21 October 7146 times

Computational fluid dynamics (CFD) when saw its development on the peak, was meant to merely validate simulations with the experimental results. But the recent trends have shown that confidence in CFD has grown and its use is on the rise to simulate physics problems which have very limited experimental data for its validation. Combustion is one such field where application of CFD and this recent trend has proved to be a boon.

Recent Trends in Modeling of Combustion - 4.7 out of 5 based on 6 votes

Browse Knowledge Base

Recommended By

Get Instant Updates

Subscribe to get instant updates about CFD courses, projects, blogs, webinars, software tutorials & CFD jobs

Search Knowledge Base

By Keyword

By Author

By Tag