FREE Webinar: CAD-Repair for CFD Simulation

Rate this item
(9 votes)
29 October

Are you a CFD engineer? Have you ever faced trouble doing meshing because of CAD issues like complexity in CAD model and CAD data loss while importing CAD geometry in CFD tools? Do you want to know how to do CAD repair and how to get geometry ready for analysis? Its necessity, process and how to do CAD-Repair? Being a CFD analyst do you want to know how to extract CFD domain and how to simplify the task of creating good quality mesh that is required for CFD analysis?

If these are some of the questions in your mind then learning how to do CAD Clean repair and good practices for dealing with dirty geometry is of prime importance in your journey as a CFD engineer.

What is CAD-Repair ?

Preparing CAD geometry for a CFD simulation is nothing but a CAD-Repair. It is technique of dealing with dirty geometry by doing modification and simplification of CAD geometry

Need for CAD-Repair ?

Great CFD results require a good mesh, and you can’t generate a mesh without the right geometry/domain. CFD engineers needs CAD-Cleanup because of following reasons.

  • Extract Domain for Analysis
  • Water Tight Geometry to generate Mesh
  • Approximate Geometry for the ease of meshing, without affecting flow physics
  • Simplify complex geometry into the appropriate granularity for your model

This webinar will discuss the most common CAD problems, how to fix them and preparing CAD geometry for grid generation. Also you will be provided with an advice on how to avoid geometry issues that can affect the process of CFD Analysis. At the end of the webinar, there will be a small demo on repairing a CAD Model using the pre-processing software, ANSYS ICEM CFD.


Content of the Webinar :

  • What is CAD-Repair? Need for CAD-Repair ?
  • Steps involved in CAD-Repair
  • CAD-Repair for Internal and External flows
  • Tips to handle complex CAD geometries
  • Efficient way of doing CAD-Repair

Watch Webinar Recording :

The webinar was conducted on 26 November 2013. Below is the webinar recording for those who missed the webinar.

Access : FREE (Using LearnCAx Account)


The Author

Praveen Kumar

Praveen is working as a Manager of CFD consultancy department in CCTech. Praveen has more than 7 years of experience in the field of CFD, with an expertise in Multi-Block Structured mesh generation. Over these years, he has successfully completed CFD projects in various domains like Aerospace, Automobile, Turbomachinery and Thermal equipment design. He has a vast experience in handling the CFD software tools such as ANSYS ICEMCFD, ANSYS FLUENT, ANSYS CFX, and EnSight.

Praveen has written blogs and conducted webinars on Pre-processing related topics like CAD repair and Mesh generation. He has interest in teaching and creating courses on fundamental topics like 'Aerodynamics'. He acted as a Mentor for engineering students and guided them in execution of their CFD projects, offered by industry or assigned by the university. He has mentored around 7 post graduate students, through LearnCAx Mentor Program.

Praveen holds a Bachelor’s degree in Mechanical Engineering and a P.G. Diploma in Advanced Computational Fluid Dynamics (DACFD).


Share thisShare on FacebookShare on Google PlusShare on TwitterShare on LinkedIn
Read 4656 times
FREE Webinar: CAD-Repair for CFD Simulation - 4.9 out of 5 based on 9 votes

Latest from Praveen Kumar

Add comment




Security code
Refresh

Comments  

 
0 Bhaskar Chakravarthy 2015-12-11 16:32
Hi,
I am unable to open the CAD cleanup webinar (after log in)...any problem with the link..?
Quote
 
 
0 Job Guevara 2016-12-27 02:10
Hi, I am trying to watch the recording but is not loading, I wonder if is needed an especial software in orden to watch it. Please, I really need to watch that recording.

Sincerely,

Job Guevara
Quote
 
 
+1 Vijay Mali 2016-12-27 15:39
Quoting Job Guevara:
Hi, I am trying to watch the recording but is not loading, I wonder if is needed an especial software in orden to watch it. Please, I really need to watch that recording.

Sincerely,

Job Guevara


Hi Job,

Thanks for reporting this. We forgot to change the video link. The link is updated now. You should able to see this now once you login with your LearnCAx login credentials.

Vijay
Quote
 

Browse Knowledge Base

Recommended By

Get Instant Updates

Subscribe to get instant updates about CFD courses, projects, blogs, webinars, software tutorials & CFD jobs

Search Knowledge Base

By Keyword

By Author

By Tag